Choosing an LED Sign for your Auto Dealership

Know what to check before you buy, from local sign regulations to installation and ongoing support.

  • ZoningPermits and local sign rules.
  • ReadabilityViewing distance, display size and pixel pitch.
  • BudgetMounting, power and installation costs.
Tall commercial pylon sign for Joe & Paul Crouse Auto Sales, featuring an LED electronic message center displaying "NEW & USED CARS" in lighting; trees and blue sky visible behind the signage. Digital Signs for Auto Dealers & Services featuring Rick Ball Auto. Business type: automotive dealership and service.

Auto Dealership sign buying guide

Start with what you can install at your location.

What zoning and permits do I need for a dealership LED sign?

Start by confirming that your property can have an electronic message center and where it can go. Give a local sign dealer your street address, photos of the road frontage, and any drawings or permits you have for existing signs. Ask them to verify the rules with the planning or zoning office before you commit to a sign location, height, or display size.

If you need a sign 10 feet or higher to clear inventory, landscaping, or a change in grade, tell your sign dealer at the beginning. Ask how the jurisdiction measures overall height, whether it allows the proposed structure, and whether the height or location triggers additional review or engineering. Your dealer can help determine whether a different setback, angle, or location gives drivers a clear view within the permitted height.

Confirm the allowable area for the entire sign and for the electronic display itself. Ask whether existing brand signs count toward your site’s sign allowance, whether a display can face both directions, and which limits apply to brightness, hours of operation, message hold time, transitions, and animation. For a replacement, have your dealer check whether adding a digital display changes the approvals needed for the existing sign. Ask who will handle drawings and permit submissions, and how the quote handles revisions required during review.

How far away will people read the sign?

Measure how much of the approach gives drivers a clear, readable view. Ask your sign dealer to document each direction of travel, the posted speed and typical traffic speed where available, the distance at which the sign first comes into view, and the point where the message needs to be readable. If the message helps customers find the service entrance, that point has to leave enough room to recognize the entrance and make the turn safely.

Look for obstructions from a driver’s position. A row of pickups, a delivery truck, a pylon sign, or a hill can take away much of the view. Check both approaches during normal lot operations, including the time of day when glare or shadows affect the display. Ask your dealer to show which lanes each proposed face will serve.

At 45 mph, a car travels about 66 feet per second. If the message becomes readable 350 feet before a driveway and drivers need to have acted on it by the time they’re 100 feet away, the sign has about 3.8 seconds to communicate within that 250-foot stretch. That’s an illustration using assumed distances. Your dealer should measure the usable distance at your property. On a short approach, a single message such as SERVICE ENTRANCE → gives drivers the information in one glance.

How big should the LED display be?

Size the active display around the lettering your audience needs to read at the distance you measured. Ask your dealer to show the proposed character height in inches, the number of words or lines that fit at that size, and the active display dimensions. The total cabinet size can include trim and other space that carries no message.

Have each bidder mock up the same two or three messages on a photo of your frontage. Test a short service or directional message, a sales event announcement, and a vehicle image if you plan to use one. Ask to review the proposed layout from the first useful reading point on each approach. A demo at the site, when available, gives you a way to judge the text and graphics under actual lighting and viewing conditions.

If the allowable display area is small, try fewer words or a different cabinet shape. A wide display may fit a directional message on one line. A taller display may give you room for two large lines or a vehicle image with a short headline. Where neither layout reads clearly, revisit placement with your dealer before choosing a display. 

What pixel pitch do I need for dealership messages and vehicle photos?

Start with what your permit allows, then check the display from a driver’s line of sight. If your location requires a monument or caps the overall sign height at 8 feet, for example, work with your installer to position the LED display where drivers can see and read it within that limit. A display mounted too close to the ground can disappear behind parked cars or landscaping, even when the sign itself meets the height requirement. Ask for a drawing that shows the height of the LED display within the overall sign, including any base and identification cabinet.

Where other mounts are allowed, a pole mount may lift the display above obstructions. A wall mount can make sense when the building faces the intended audience and the wall can support the display. For any option, check the proposed height and angle from a driver’s eye level in both directions of travel. Make sure people can read the message before they pass the entrance.

Can I put an LED display in my existing monument or pylon?

Have a local sign dealer inspect the existing structure and confirm the approvals before pricing it as a retrofit. Share any drawings, permits, and electrical records you have. Ask the dealer to check the cabinet opening, supports and foundation, electrical capacity, data connection, and access for future service. Ask whether an engineer needs to review the proposed display’s weight and wind loads.

Compare the active display that fits the existing opening with the size you need for readable messages. If both a retrofit and a new structure are feasible, ask for separate quotes. Have the dealer spell out demolition or modifications, electrical and site work, and the lift or access equipment needed for installation and service.

Who will keep dealership messages accurate?

Choose who will create, approve, schedule, and remove messages before you buy the software. Sales and service may run different promotions, and a dealership group may need approval from a central marketing team. Ask the dealer to demonstrate those roles using the software included in your quote.

Give them a real task. Have them schedule a weekend promotion, set it to expire automatically, and replace it with regular service hours. If you plan to feature individual vehicles, ask how staff will remove a sold unit quickly. For offers with required terms or manufacturer approvals, have your team review sample messages before deciding what belongs on a roadside display. Ask who provides training, what recurring fees apply, and what the display does if it loses its connection.

What should an installed LED sign quote include?

Give each local sign dealer the same site information and sample messages, then ask for an itemized proposal. Compare:

  • Approvals and site work. Site survey, drawings, engineering, permits, removal, foundation or structural modifications, electrical work, and data connection.
  • Display and installation. Overall height, active dimensions, number of faces, pixel pitch and matrix, brightness controls, lift work, installation, and commissioning.
  • Software and training. User access, scheduling, training, connectivity charges, and any recurring software fees.
  • Warranty and service. Who takes the call, who performs onsite work, which parts are covered, and what you may pay for labor, travel, shipping, or lift access.

Before signing, ask the dealer to walk you through the proposed location and height, the first readable point from each approach, and the sample content at the quoted size and pitch. Confirm who handles any changes required during permitting and who you’ll call once the sign is in service.

 

Planning a sign for your Dealership?

Send us a photo of your existing sign and any requirements you already have. You can upload the photo when you request a quote.